Ceramic dishes supplier today teach you three steps to choose ceramic dishes, hoping to help you choose high-quality ceramic dishes.
1. Look down
If you buy a ceramic dishes at home, don't see a colorful plate that looks good and buy it directly. Nowadays, the market is full of beautiful products with poor materials. The general ceramic tableware is fired on the kiln plate. Therefore, the part of the foot (ceramic bottom) is generally not glazed. It is precisely because there is no glazed cover, so you can directly see the material of the ceramic body. So get a plate and turn it over to see the color at the bottom. The part of the good porcelain handle should be white and delicate, and it will be smooth when touched by hand. Poor porcelain has its own problems.
The second thing is to take out your phone, turn on the flashlight, and watch through the plate. Note, don't trust the clerk to tell you about this at this time. At this time, it is not transparent or not, but whether the part of the light transmission is uniform and free of impurities. If you can see that there are obvious black spots in the light, you must not buy them. The part of a good ceramic that transmits light is very uniform.
The fact that a piece of ceramic is transparent and there is no absolute connection between the quality of the material. A plate made of the same material will be a little thinner, but the plate will be thinner, the strength will naturally decrease, and the heat insulation performance will be relatively weak. It will be a little hot when used. The same thin and thick plate material will have different light transmission properties. Bone china is more transparent than hard porcelain, because the internal structure of bone china is relatively loose and hard porcelain is denser. From this point alone, it is not good or bad.
3.Using a knife
It may be exaggerated with a knife, but let's talk about the principle inside. There are two things to look at in the knife. One is the glaze hardness. Under normal conditions, the ceramic glaze hardness should reach Mohs hardness of 5. The general hard object will not leave a mark on the ceramic surface. If you use a knife to make a black mark on the ceramic surface, then your plate will become a face cat in a few days. The second purpose of the knife is to draw the surface pattern, and the decorative pattern of the normal ceramic surface is fired at a high temperature. The general use situation will not fall off, if you use a hard object to scratch it, it means that the decoration process is not qualified. Everyday use will fall off, not only ugly, but you can imagine where the falling colors go.
The above three steps can actually help you pick a good ceramic tableware. Our company offers a variety of ceramic tableware and custom ceramic dishes, quality assurance, safe and reliable, and is very popular among users at home and abroad. If you have any needs, please feel free to contact us.